Operating elements and accessories for PELLPAL boilers

The set consists of 2 properly cut sections of glass sealant, which are matched to the size of the door of the PellPal boiler for pellets with a power of 12 kW. All sections of the sealant were cut to the appropriate dimensions and secured ...

The set consists of 2 properly cut sections of glass sealant, which are matched to the size of the door of the PellPal boiler for pellets with a power of 24 kW. All sections of the sealant were cut to the appropriate dimensions and secured ...

The set consists of 3 properly cut sections of glass sealant, which are matched to the size of the door of the 25 kW PellPal D boiler. All sections of the sealant were cut to the appropriate dimensions and secured against unraveling. It is ...

Flexible spiro pipe to connect the pellet feeding system with the burner in the 12 kW PELLPAL boiler. The pur hose is primarily used in heating and is intended for biomass feeders. The pipe is used as a connection between the fuel tank and ...

Flexible spiro pipe to connect the pellet feeding system with the burner in the 18 kW PELLPAL boiler. The pur hose is primarily used in heating and is intended for biomass feeders. The pipe is used as a connection between the fuel tank and ...

Flexible spiro pipe to connect the pellet feeding system with the burner in the 24 kW PELLPAL boiler. The pur hose is primarily used in heating and is intended for biomass feeders. The pipe is used as a connection between the fuel tank and ...

Flexible spiro pipe to connect the pellet feeding system with the burner in the 8 kW PELLPAL boiler. The pur hose is primarily used in heating and is intended for biomass feeders. The pipe is used as a connection between the fuel tank and ...

A set of cast iron grates, 28 cm long, adapted to the furnace of the PELLPAL D wood boiler with a power of 16 kW. This set consists of 9 pieces of grates, which, when arranged, perfectly match the furnace of the PellPal D 16 kW boiler. It s...

A set of cast iron grates, 32 cm long, adapted to the furnace of the PELLPAL D wood boiler with a power of 20 kW. This set consists of 9 pieces of grates, which, after being arranged, perfectly match the furnace of the PellPal D 20 kW boile...

A set of cast iron grates, 32 cm long, adapted to the furnace of the PELLPAL D wood boiler with a power of 25 kW. This set consists of 11 pieces of grates, which, when arranged, perfectly match the furnace of the PellPal D 25 kW boiler. It...

Domer high-temperature fire-resistant silicone is a high-quality sealant for places exposed to direct contact with fire, e.g. fireplaces, stoves, hearths, grills, boilers, etc. It enables heat-resistant fixing and sealing of elements made o...

CX-80 high-temperature sealant resistant to very long exposure to high (+380 OC) and low (-65 OC) temperatures. It is an elastic, fast-curing sealant that reacts with atmospheric moisture to form a durable, non-shrinking, UV-resistant fill...

The PSx-2 pellet lighter is the only original lighter on Allegro. Don't be tempted by Chinese and Japanese substitutes. Such lighters do not have such high quality and durability as original Polish products. The igniter looks the same, but...

Handle for closing the door with a plastic handle for PELLPAL boilers. It can be used in other types of central heating boilers. Strong construction allows for strong pressing of the boiler door. It is made of a special plastic alloy that g...

Blower gasket (rubber) for any type of boiler. Mounted under the blower flange at the connection with the boiler or feeder. It has cut-out areas for the mounting screws of the device. Thanks to the use of a gasket, the air blown by the fan ...

PT-1000 flue gas sensor with a 2 m long cable. Such sensors are usually installed in the flue by drilling an appropriately sized hole. The sensor should be inserted into the hole and fastened with a screw. The hole is best protected agains...

Ash drawer adapted to the PELLPAL D 25 kW boiler. It is made of 1.5 mm thick steel. The drawer was cut from a single piece of steel in the laser cutting process, then bent on a digital press, welded and powder coated. The production process...

Ash drawer adapted to the PELLPAL D boiler with a power of 16 kW. It is made of 1.5 mm thick steel. The drawer was cut from a single piece of steel in the laser cutting process, then bent on a digital press, welded and powder coated. The p...